Dual Pass LFP Intercooler Heat Exchanger 2007+ Shelby GT500

Features

• All aluminum tig welded light weight construction
• Up to a 60-70 degree lower intake temperature is possible at wide open throttle.
  
• over twice the core size of stock exchanger
• Prevents Heat Soak
• 18 fins per inch for maximum airflow/maximum cooling
• Much larger fluid holding tanks
• Furnace brazed eliminating any sealing problem or the need for epoxy

All new from LFP is the Extreme Performance DUAL PASS Heat Exchanger for the 2007+ Shelby GT500 Mustangs.  LFP is the current leader in aftermarket performance heat exchangers for the 2003-2004 Supercharged SVT Cobras and the SVT F-150 Lightning's.  There are more vehicles running the LFP Dual Pass Heat Exchanger than any other aftermarket heat exchanger in the World!  LFP has applied the same extreme cooling technology we have developed for Ford, GM, and Mercedez Benz to our latest design, the Shelby GT500.

2007 Supercharged Cobras are Hot Natured vehicles. When adding aftermarket performance parts expect your intake temps to rise even higher due to your supercharger making more heat. Adding an LFP Extreme Heat Exchanger will significantly reduce intake charge temps allowing you to keep the power that you worked so hard to obtain. LFP intercooler EXTREME heat exchangers mount in stock position.

There's a reason that LFP is the most sold heat exchanger for the past 10 years, and that's design. LFP Heat Exchangers are making full use of the laws of physics, developing 18 cooling fin per inch cores and offering more cooling tubes per core than any other aftermarket unit. The primary use of fins is to extract heat from the fluid tubes that they are attached to, LFP's 15% increase in fin count results in a quicker cool down.  We also offer the thickest cooling tubes on the market to allow the maximum amount of cooling efficiency by sending more fluid through the core at one time which allows for overall lower IAT Temps.  Combine that with the largest dual core surface area, large polished holding tanks, and a dual pass design, you have the most efficient cooling machine in the industry.

Some manufacturers are offering heat exchangers with very THICK 3-5 Core units.  LFP explored this option but decided against it to go with a more efficient 2 core design.  Although more cores sound good it actually works against you.  A 3+ core design becomes in-efficient as air tries to pass through too thick of a core. 

Core Size
LFP core is 9" tall x 26.5" wide x 2.75" thick.
Stock is 6" tall x 23" wide x 1.25" thick.

Height:
Stock 6"
LFP 9"

Width:
Stock 23"
LFP 26.5"

Thickness:
Stock 1.25"
LFP 2.75"

Front Face Area
Stock 138. sq. in.
LFP 238.50 sq. in. (57% increase)

Overall Surface Area:
Stock 172.50 cu. in.
LFP 655.87 cu. in. (263% increase)

Get Your's Today and Chill Out!!