Dynojet Wide Band 2 Kit with LCD-200

The Wide Band 2 Kit Includes the Following:

• 1 Wideband 2 Module
• 1 LCD-200 Screen
• 1 Data Acquisition Cable (optional with 15-7011 kit)
• 1 Bosch LSU 4.2 Wide Band Oxygen Sensor
• 1 Oxygen Sensor Cable
• 1 Oxygen Sensor Weld Bung, Plug, and Copper Washer
• 2 Dynojet CAN-Link Port Seal
• 3 Wire T-taps
• 1 Terminal Strip Plug
• 2 Dual Lock Strips
• 1 Alcohol Swab
• 3 Zip Ties
• 1 Warranty Registration Card
• 2 Dynojet Decals
• 1 Installation Instructions

Dynojet LCD-200 LCD Display Unit for Wide Band 2

The Dyno Jet LCD Display connects to any Power Commander USB via a "quick disconnect" cable. It is designed to remain on the bike and is weatherproof. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function hub is also installed all of its data is available for viewing as well.

Multiple maps can be stored in the on board memory. These maps can be sent to the Power Commander "on the fly". Additionally, maps can be adjusted using the controls on the display.

The LCD Display has the ability to log the data being displayed for later analysis.

  There is a SD Memory card slot (SD Card sold separately) so that the amount of data storage for maps and logging can be increased at any time.

Easy  Unit  Dismount
The unit can be removed easily from the bike and programmed with desktop computer.

Maps can be loaded, stored and the data viewed with the supplied software. As new functions, screen and features become available the unit is "user upgradable" using the supplied USB cable and free downloads on the website .
Dyno Jet LCD Display
Product Features
Display all Power Commander data "real time"
Allows storage & switching between multiple maps
Data logging capable
"On Screen" map adjustments
User configurable screens
USB programmable & upgradable
Active matrix TFT LCD 240 X 320 16bit color screen (Requires Windows 2000, ME or XP)

User Friendly Adjustment Control Buttons & "Joystick"
What can I do with the Dyno Jet LCD Screen...?
Run ALL NEW Drag Race Simulator for Dyno Jet LCD Screen
Adjust your quick Shifter settings.
Change your Maps, and view them .
View your Wideband Commander Files.
View and Adjust your  Power Commander Settings including Fuel Trim.

Wide Band 2 Options:

• Dynojet LCD Full Color Touch Screen Display
• White or Black Analog Gauge, 52mm (2 1/16”)
• White or Black Digital Gauge, 52mm (2 1/16”)
• Data Acquisition /Gauge Combination Harness
• Dynojet CAN-Link Cable

Wide Band 2 Technical Features:

• 0-5v Calibrated Analog AFR Output (Connects to external data acquisition device)
• One wire RPM hookup
• 0-5v analog input (TPS, MAF, boost, etc…)
• Built-in Sensor Condition Test
• Durable enclosure and wire sheathing for years of trouble-free operation
• Dynojet CAN-Link communication , allows for expansion options

Wide Band 2 Product Specifications:
Power Requirement 11.5 - 15 VDC, 3A
Dimensions 2.80"w x .56"h x 1.488"d
Range: .68 lambda - ambient air

Inputs:
Analog: 0-5 VDC
Digital Square wave, 0 - 12 V nominal (coil (-) tachometer signal)

Outputs:
Gauge Driver 0 - 5 VDC analog
Calibrated AFR 0 - 5 VDC analog
Simulated Narrow Band
Dynojet CAN-Link (accessory cable required)