Static Flow Rate: 42.29 lb/hr (+/-4%)
Dynamic Flow @ 2.5ms PW @ 100Hz: 9.96 mg/pulse (+/-6%)
Coil Resistance: 15.9 Ohms (+/-0.35 Ohms) (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Tri-Cone
Physical Dimensions: EV1 Body Type
Connector: Minitimer (Bosch EV1)
Factory fitted with Viton upper and lower o-rings.
Details Adding an aftermarket Supercharger/Turbocharger may max out your current injectors. The fuel injector flow must be matched to the airflow requirements of the engine over the entire rpm operating range. The injectors must be able to supply a large
amount of fuel at wide-open throttle to prevent high rpm lean out, and transitional amounts to cover all of the operating conditions in between. Supercharged engines in particular place even more rigorous demands on an injector range because of their increased airflow capability.
